PLASTIC MOON

A1000_PLASTIC_MOON_img_01.jpg

该项目是由 Atelier Norisada Maeda 设计,位于日本东京。白色外观,通透的玻璃,典型日式简约主义风格。

以下是设计事务所提供的项目简介:

For this project a moulding form coins the shape of space. According to this positive form, every space in the building alongside with its scenery is being created as the negative counterpart to it.

Moulding forms are usually being filled with liquid metal in order to shape a certain kind of part or product.

In order to shape the spaces of the three floors of Plastic Moon, four casting moulds were used.

[In the lower picture, from left to right, you can see the forms for the basement, first floor, second floor and for the roof.]

Additionally the “height difference of the mould” adds up to 1.2 meters and in some places even breaks open for void-like atria to flood and furthermore connect the rooms with light.

These forms have then been translated into architecture as seen in the next picture.

Which practically means, that the casting moulds of the upper picture were translated into the architectural shape of the lower picture while undergoing minor changes during this translation process.

Finally the four molds are vertically stacked on top of each other.

Thus, “liquid” living space for the human being emerges out of the proportions in between the “solid” mutual molds.

And this characteristic seals the difference in the quality of the special spaces in Plastic Moon.

This difference in quality can be felt emotionally deep throughout the building, no matter in which part of the houses’ liquid you might be standing, floating or sitting.

 

设计事务所 Atelier Norisada Maeda
地点 日本, 东京
面积 site 171.91m2 / total floor 206.59m2
摄影 Toshihiro Sobajima

 

 

 

VN:F [1.9.22_1171]
Rating: 5.0/5 (1 vote cast)
PLASTIC MOON, 5.0 out of 5 based on 1 rating
地点: 日本, 东京